Samsung Galaxy Ace S5830 ROOT,CUSTOM ROM,RECOVERY
This tutorial will show you how to upgrade and root your Samsung Galaxy Ace S5830. This method is the simplest way to do it.
What you need:
- Samsung Kies (Official Samsung site: http://www.samsungapps.com/about/onPc.as)
- ODIN 4.38 (here: http://www.multiupload.com/MUBOZPEOS3)
- SuperOneClick 2.3.3 (here: http://forum.xda-developers.com/showthread.php?t=803682)
- New firmware (You must be registered on this page and remember to select appropriate
- region!:http://www.samfirmware.com/WEBPROTECT-s5830.htm)
- OPS file (You must be registered to download: http://www.samfirmware.com/WEBPROTECT-s5830.htm)
- ClockworkMod Recovery 5.0.2.6
- (here:http://forum.xdadevelopers.com/atta...3&d=1318051346)
HOW TO ROOT SAMSUNG GALAXY ACE:
- Install Samsung Kies
- Turn on your phone
- Enable Debugging at Apliccations>Programming
- Connect your phone into PC via cable
- Launch SuperOneClick 2.3.3
- Click "Unroot"
- Wait
- When the process is complete turn off SOC and unplug your phone
- Reboot to apply changes
- Now you have unrooted phone!
FLASH THE LAST ROM AVAIBLE:
- Turn off your phone
- Remove your SIM Card and SD Card
- Extract previously downloaded firmware
- Open ODIN 4.38 on your PC
- Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
- Connect your phone via USB into PC
- When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
- If ODIN detected and recognised your phone should light up the first square to the left side
- Press "Start" button and wait, the process should take ~5 minutes
- If all goes well your phone should reboot automatically
- Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
- Disconnect your phone
- Turn off your phone
- Insert your SIM Card and SD Card again
- Turn on your phone
- Now you have the newest firmware!
Flash Custom Recovery:
- Push recovery-clockwork-5.0.2.6-galaxyace.img to your device using "adb push recovery-clockwork-5.0.2.3-galaxyace.img /tmp/" command
- Turn off your phone
- Press POWER+HOME BUTTON
- Login to your device over "adb shell"
- Mount /system using "mount /dev/block/stl12 /system" command
- Flash CWM recovery using "flash_image recoveryonly /tmp/recovery-clockwork-5.0.2.3-galaxyace.img" command
- Umount /system using "umount /system" command
- Reboot your device using "reboot recovery" command to test your new CWM recovery
- Reboot your device
Rooting for 2.3.3/2.3.4/2.3.5/2.3.6/2.3.7
:
- Download attached file called upd_1.zip and copy it to your sdcard
- Turn off your phone
- Press POWER+HOME BUTTON
- Select update from sdcard, select the file upd_1.zip
- After the update completed - reboot
- Now you have rooted S5830
Yo man i have this phone and im stuck at the part about extracting the firmware. i got the right one for my phone and there is an .md5 image file and a .dll file. I used odin with this image as PDA and that worked but upd_1 and cwm or any custom rom anything says i got the wrong phone. any help would be awesome. thanks
ReplyDeletewow, perfectly worked for rooting my galaxy ace S5830.. thanks brother..
ReplyDeletei hv done flashing use ODIN, after finish n reboot it just stop in samsung logo then automatic reboot to samsung the reboot again, n always ..
ReplyDeletewhy ?? HELP Me please ...
He missed one step. The final step While flashing with odin, go to recovery (Press Home + Power button) and do a factory reset/wipe data and wipe cache and reboot your device. It
Deletewill boot fine after that.
bad rooted link
ReplyDeleteSamsungs9+
ReplyDeleteBixby it's
ReplyDeleteThank You and that i have a super offer you: Is It Good To Buy Old House And Renovate house renovation plans
ReplyDelete